Foliar Feeding & Drenching
Posted: November 3rd, 2013, 6:03 pm
Foliar Feeding & Drenching
Foliar feeding has been used since 1844 when it was discovered that plant nutrients could be leached from leaves by rain. Experiments then proved that nutrients could also enter the plant through the foliage.
Feeding the soil is the basis of organics. However, there are ways of stimulating the natural processes in the soil and in the plants by spraying the foliage and can provide some significant advantages.
Foliar sprays such as NPK,Iron sulfate, compost tea, liquid humate and seaweed and other water soluble nutrients are fertilizers. When fertilizer nutrients are sprayed directly on the foliage, immediate results can often be seen because the micronutrients, when taken in through the foliage, are immediately available to the plant.
Here are some points to remember when using foliar sprays:
1. Less is usually better in foliar sprays. Light, regularly applied sprays are generally better than heavy, infrequent blasts. Mists of liquids are better than big drops, unless you are also trying to control pests. The exception is spraying heavy enough to get the material to run off plants and also drench into the soil.
2. High humidity increases a leaf’s ability to absorb sprays. Spraying on damp mornings or evenings will mornings or evenings will increase the effectiveness of the spray. Small openings (stomata) on the leaves close up during the heat of the day so that moisture within the plant is preserved. The best time of day to spray for pest control is late afternoon. Daybreak is usually best for foliar feeding. Spraying during the coolest part of the day is the key. Spraying during a light rain is ideal. You sure can't do that with synthetic chemicals.
3. Young foliage seems to absorb nutrients better than old, hard foliage. Therefore, foliar feeding is most effective during the periods of new growth on plants.
4. Adding sugar or molasses in small amounts to your spray solutions can stimulate the growth of beneficial microorganisms on the leaf surfaces. The stimulation of friendly microbes helps to fight off insect pests and harmful pathogens.
5. Foliar feeding will increase the storage life of food crops. It will also increase cold and heat tolerance of landscape plants and food crops.
6. Foliar feeding should not be used alone. Soil feeding is also needed to keep the roots from getting lazy.
Drenching is the application of the same foliar spray mixes into the soil. This is an especially effective technique when applying beneficial organisms, such as mycorrhizal fungi, which require contact with roots to activate.
article from.
http://www.dirtdoctor.com/Foliar-Feedin ... vq2894.htm
with few modification.
Foliar feeding has been used since 1844 when it was discovered that plant nutrients could be leached from leaves by rain. Experiments then proved that nutrients could also enter the plant through the foliage.
Feeding the soil is the basis of organics. However, there are ways of stimulating the natural processes in the soil and in the plants by spraying the foliage and can provide some significant advantages.
Foliar sprays such as NPK,Iron sulfate, compost tea, liquid humate and seaweed and other water soluble nutrients are fertilizers. When fertilizer nutrients are sprayed directly on the foliage, immediate results can often be seen because the micronutrients, when taken in through the foliage, are immediately available to the plant.
Here are some points to remember when using foliar sprays:
1. Less is usually better in foliar sprays. Light, regularly applied sprays are generally better than heavy, infrequent blasts. Mists of liquids are better than big drops, unless you are also trying to control pests. The exception is spraying heavy enough to get the material to run off plants and also drench into the soil.
2. High humidity increases a leaf’s ability to absorb sprays. Spraying on damp mornings or evenings will mornings or evenings will increase the effectiveness of the spray. Small openings (stomata) on the leaves close up during the heat of the day so that moisture within the plant is preserved. The best time of day to spray for pest control is late afternoon. Daybreak is usually best for foliar feeding. Spraying during the coolest part of the day is the key. Spraying during a light rain is ideal. You sure can't do that with synthetic chemicals.
3. Young foliage seems to absorb nutrients better than old, hard foliage. Therefore, foliar feeding is most effective during the periods of new growth on plants.
4. Adding sugar or molasses in small amounts to your spray solutions can stimulate the growth of beneficial microorganisms on the leaf surfaces. The stimulation of friendly microbes helps to fight off insect pests and harmful pathogens.
5. Foliar feeding will increase the storage life of food crops. It will also increase cold and heat tolerance of landscape plants and food crops.
6. Foliar feeding should not be used alone. Soil feeding is also needed to keep the roots from getting lazy.
Drenching is the application of the same foliar spray mixes into the soil. This is an especially effective technique when applying beneficial organisms, such as mycorrhizal fungi, which require contact with roots to activate.
article from.
http://www.dirtdoctor.com/Foliar-Feedin ... vq2894.htm
with few modification.
