Drip irrigation and sprinkler systems: component intro and d

[talha.bin.ayub]

10- end-clamps: to close the terminal parts of the tube


Sent from my iPhone using Tapatalk

[talha.bin.ayub]

11- (missed this earlier) this filter is essential to dripline working, it goes at the faucet end of dripline


Sent from my iPhone using Tapatalk

[talha.bin.ayub]

12- this is the pressure regulator: also connected to the faucet


Sent from my iPhone using Tapatalk

[talha.bin.ayub]

13- 1/2" dripline to 1/4" micro dripline connector. This is one item that I felt had to be sourced from rainbird via Amazon as no one had it locally. The connectors available were of extremely poor quality(either local made or of Al wassal (ksa)), and leaked.
Rainbird connectors had a snug fit and a must have


Sent from my iPhone using Tapatalk

[talha.bin.ayub]

14- punch device to poke a hole in 1/2" tubing for the above connector in case u r attaching micro dripline or if u r attaching the dripper directly


Sent from my iPhone using Tapatalk

[talha.bin.ayub]

ImageUploadedByTapatalk1433375938.669764.jpg (11.85 KiB) Viewed 5570 times

Dripper attached directly to 1/2" dripline


Sent from my iPhone using Tapatalk

[talha.bin.ayub]

15- 1/4" micro dripline: to convey water from 1/2" dripline to the pot. It's one end goes into 1/2" dripline via the connector and the other end attaches to the dripper/emitter


Sent from my iPhone using Tapatalk

[talha.bin.ayub]

Sent from my iPhone using Tapatalk

[talha.bin.ayub]

16- drippers: each of specific measured water emitting capacity ranging from 0.5-5 gallons/hour or 2-20 litres/hour. So each dripper u use is tailored to your plants water needs


Sent from my iPhone using Tapatalk

[talha.bin.ayub]

17- micro sprinklers can also be attached instead of drippers: these throw greater water quantities than drippers


Sent from my iPhone using Tapatalk